Message-ID: 
Newsgroups: AIRGUN.LIST
Does this natural linseed oil hold up as well as the Birchwood Casey stuff?
Is it the same thing? (for a stock finish)
-----Original Message-----
From: Larry Durham 
To: Multiple recipients of list AIRGUN.LIST 
Date: Thursday, February 19, 1998 8:32 PM
Subject: Re: grip finish
>Right on Dave!  I've used this "natural Loctite" many times, it works
great!
>ld
>
>Dave Markowitz wrote:
>
>> Brian,
>>
>> I have used plain old boiled linseed oil available from any decent
>> hardware store.  It's a lot cheaper than the stuff sold in gun shops
>> and works well in my experience.  I used it on a Dixie Tennessee
>> Mountain Rifle which I built from a kit.
>>
>> It's also good to keep screws from coming loose: AFTER you tighten the
>> screw in, put a small drop on the screw head so that it touches
>> whatever you're screwing it into.  When it hardens it'll keep things
>> from coming undone.
>>
>> (Just though I'd drop that in. )
>>
>> Regards,
>>
>> Dave
>>
>>  * 1st 2.00 ~ Well done is better than well said.     Ben Franklin
>>
>> --
>>  (Dave Markowitz)
>>  AirPower Information Services BBS * 610-259-2193
>>      PRN Regional HQ, Northeast United States
>>             FREE copy of 1st Reader!
>> http://www.voicenet.com/~jimhenry/airpower.html
>
>
>
>
>
>--
> (Larry Durham)
> AirPower Information Services BBS * 610-259-2193
>     PRN Regional HQ, Northeast United States
>            FREE copy of 1st Reader!
>http://www.voicenet.com/~jimhenry/airpower.html
--- QScan/PCB v1.19b / 01-0671
---------------