Kris Steenhaut schrieb:
> 
> 
> Herbert Rosenau schreef:
> 
> 
>>>The desktop was 192.168.0.1 and the laptop 192.168.0.2. While is running 
>>>ftpdeamon, netdrive assigns drive letter L: to 192.168.0.2 (laptop). And 
>>>then you can copy from one system to another just as from one dribe to 
>>>another. That is very easy for once.
>>>   
>>>
>>
>>When the router has 192.168.2.1 then you should give
>>desktop: 192.168.2.2
>>laptop:  192.168.2.3
>>
>>whereas the x.x.x.y and x.x.x.y has to be identical on all computers 
>>(see the router as another computer for that!) y must be different on 
>>each and in the range 1 - 254. 0 and 255 are reserved values! So 2 and 
>>3 are only samples for y.
>>
>>
>> 
>>
> 
> OK. That means I'll have re-configure that part of netdrive as well. 
> Netdrive is not the problem, but how and where do I set 192.168.2.2 and 
> 192.168.2.3?
> 
> I've looked at the example files Don had sent to me. His setup.cmd for 
> his main PC:
> 
> route -fh
> arp -f
> ifconfig lo 127.0.0.1
> ifconfig lan0 192.168.49.12 netmask 255.255.255.0 metric 1 mtu 1500
> REM ifconfig lan1 metric 1 mtu 1500
> .
> .
> REM ifconfig sl0
> route add default 192.168.49.11 -hopcount 1
> ipgate off
> 
> and his second (firewall PC):
> 
> route -fh
> arp -f
> ifconfig lo 127.0.0.1
> ifconfig lan0 192.168.49.11 netmask 255.255.255.0 metric 1 mtu 1500
> REM ifconfig lan1 nil

This is an example of setup.cmd when you use static IPs in your local 
network.

The IP in line
ifconfig lan0 192......
is the IP of the computer you have the setup.cmd on screen. Change it 
so that
192.168.49.11
gets readed as
the IP your router owns - except the number behind the last dot, that 
means
192.168.2.x
whwereas the IP of your router is
192.168.2.1   (or may be 192.168.1.1)
The first 3 numbers have to be identical on each computer (router 
looks here like another PC even as it is not a PC.
the 4. number has to be different on each. No more changes needed!

> .
> REM ifconfig lan7 metric 1 mtu 1500
> dhcpstrt -i lan1
> REM ifconfig sl0
> ipgate on

This is the rest of an sample (route -fh and arp -f and so on are 
missing) of an computer using DHCP.

> Can I replace my values without to much of hassle by his ones?

Yes, see above. You have to run setup.cmd after you've saved it to get 
it working.

> btw: the part I don't understand is the entry "dhcpstrt -i lan1". I 
> thought external connections always have to be at lan0. From my laptop 
> to my routier, is that an external connection Y/N?

You are speaking about connections to your local network, not a remote 
one. Connections to a remote one are done by the router. That is the 
section declaring the connection to your provider, not the one for 
your own net. Commonly your provider will use DHCP to assign your 
router an IP for his (not your) network. Your network has 192.168.x.y.

Yes, your router owns 2 different IPs: 192.168.1.1 (or 192.168.2.1 as 
its IP connectiong to your local net and either DHCP or another IP to 
connect to the provider. For that it is the router.

ISDNPM (ecsconnet) or injoy tries to hide that from you.

-- 
Tschau/Bye

Herbert Rosenau                    eCS 1.2 Deutsch bestellen bei
EDV Beratung & Programmierung           http://pc-rosenau.de
Eichelsdorfer Str. 15
97461 Hofheim i.UFr.

Tel: 49-9523-502834
Fax: 49-9523-502823                     http://www.dv-rosenau.de/


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/E8folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---