Hi All,
Just tried attaching a USB device for the first time to my new laptop.

Laptop has 3xUSB ports - which should support USB 1.1 & USB 2.0.

However, after attaching devices, a memory stick that supports USB 2.0 
shows up in USB Resource Manager; but a camera - and a SD Memory card 
reader which are only USB 1.1 do not show up in USB Resource manager and 
cannot be used.

Any ideas on causes for this?  Relevant section of config.sys is:
BASEDEV=USBEHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBD.SYS
BASEDEV=USBHID.SYS
DEVICE=e:\utilities\GPHOTO2\gph2usb.sys
BASEDEV=USBMSD.ADD
REM BASEDEV=USBCDROM.ADD
DEVICE=C:\OS2\BOOT\USBKBD.SYS
DEVICE=C:\OS2\BOOT\USBMOUSE.SYS
REM DEVICE=C:\OS2\BOOT\USBCOM.SYS
DEVICE=C:\OS2\BOOT\USBPRT.SYS
DEVICE=C:\OS2\BOOT\USBRESMG.SYS

USB?HCD;USBD.SYS & USBHID are 30/9/03 versions.. (latest AFAIK).

Needless to say, card reader and camera work fine in WinXP :(

Any ideas?

Cheers,

Paul.


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---