In , on 09/28/04 
   at 07:50 AM, Mike O'Connor  said:

>mwizard99{at}comcast.net wrote:

>>In , on 09/28/04 
>>   at 07:03 AM, Mike O'Connor  said:
>>
>>>wizard99{at}comcast.net wrote:
>>>    
>>>

>Hi Mark,

>Are you sure that there's no BINARY content at the beginning of that 
>TEXT file? Looked at in in HEX?
>Like a CTRL-D character [0x04] that used to stuff up printing from 
>Windoze to Laserprinters on the network, when I still worked [in the 
>Weather Bureau]

>When you say 'tried", what does that mean exactly? 
>*Here*, when I RMB on the Spooler, the bottom item on the menu says 
>"Disable Spooler" - clicking that, the print jobs go direct to the 
>printer. Another RMB on the Spooler then shows that item as "Enable 
>Spooler".

I've checked in HEXEDIT, the file I'm trying to copy out to the printer
port.  And it definitely contains just text characters.

And when I say tried, I mean hopefully like what you would expect...  

I clicked the "disable spooler" menu item and then issued the same  copy
commands to see if the spooler was interfering with my efforts.  And
disabling the spooler did not help my problem.


-Mark



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


---