-=> Quoting Virgil Garness to Bob Levine <=-
 VG> I'm interested in the following stuff:
 
 -> Fujitsu 500 MByte SCSI hard drive, 3.5" HH...................... $ 95.
 
 -> Adaptec 1740A SCSI-II adapter, high-performance EISA, up to 14
 -> SCSI devices, w/docs............................................ $ 30.
 VG> But I'm a bit new to the SCSI thing and what out of the rest would I
 VG> need to get this pair running? (cables terminators and such)
The Adaptec 1740A is specifically for the EISA bus.  If you don't 
have an EISA bus, it won't work in your system.  
The Fujitsu drive will work with any SCSI adapter, and it has a 
removable terminating resistor pack.  You will also need a cable 
from the card to the drive.  No device drivers (software) are 
needed if you only have 1 or 2 SCSI hard drives; I can supply the 
drivers for CD-ROMs, tape drives, more than 2 hard drives, etc.
 
___ Blue Wave/QWK v2.12
--- PCBoard (R) v15.3/M 10
---------------