altownsend{at}dccnet.com wrote:
> Wed, February 09, 2005 - 10:48 PM
> 
> Hi Don:
> 
> Do this:
> 
> 1- install network card
> 2- install drivers (this takes the most time
> 3- Plug cable into network card
> 4- Plug other end into router (port 1-4)
> 5- Plug second cable into in coming on router
> 6- Plug other end into Cable or DSL modem.
> 7- Turn on the power to all let them snyc and you are in business,
> 
> Here I had to have the moem plugged in for 1/2 hour for it to sync
with the cable company.
> 
> Router was plug-plpug and power up and was running.
> 
> Powerouts occur here and when it comes back on it only takes 2 or 3
minutes to sync up
> 
> Note here some of the routers use different quad numbers. 
> 198.168.x.x where x.x can be 0.0, 0.1, or 1,0

    192.168.x.x ....

     Re: RFC 1918 http://www.faqs.org/rfcs/rfc1918.html>

     Also get "Understanding IP Addressing" 
http://www.3com.com/other/pdfs/infra/corpinfo/en_US/501302.pdf>


> 
> Regards Al
> 

MarkO


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---