> aborted.  I tried this at least a half a dozen times,
 > reloading the
 > original flash code after each failed attempt.  It
 > aborted at the same
 > place each time.  I even set my baud down to 9600 and
 [----------^^^^ you said the above ^^^^-----------]
Just a suggestion....
Try AT&F2, save that, so now it's a plain factory AT settings. Retry the 
Xmodem process again and check results. If it doesn't work, maybe there is a 
problem reason with the modem. good luck -_-_-Bill
---
---------------