** Reply to note from Julian Thomas  Tue, 02 Nov 2004
07:57:40 -0500

> 8kda3j and 8kda3+ - both using Nforce3-250GB chipset. 
>  
> Anyone have any experience with either of these?  Is the 3j like the 3+ 
> except without the Raid and additional sata slots? 
>  
> Finally, do they take ECC memory?  Epox website is silent on this. 
>  
> Downloaded the usermanual.  Searching the PDF file for ECC turns up one 
> hit, but it's a valuable clue - a POST code that indicates ECC autodetect.  
> Going to the AMD website (these are Athlon64 boards) elicits the info that 
> the CPU chip itself does the memory, and does handle ECC. 
>  
> Getting close to buying!

Julian... I know you are an ECC memory buff and hope you find it.

Perhaps, look in the pdf Manual in the section Installation/System
Memory Configuration/Memory layout...(or the like)

Here, mine states explicity: "This mainboard does not support ECC
memory module."

Hopefully, you manual states otherwise.

.... Gerry


Gerry Chilibeck.......in West Vancouver, Canada
Runnin' eCS 1.14, eCS 1.01, Lotus SS 1.72, PRMail 3.0, 
        NS 4.61, Moz 1.7, EmTec FTP, DragText 3.8, 
        Key Ring/2, XWorkplace 1.0.2, PN/2 b153, RSJ 5.52      


------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---