Don{ald} O. Woodall wrote:

>In , on 11/01/2004 
>   at 09:01 PM, "Gordon Barnard"  said:
>
>
>  
>
>>I recently signed up for Cable Internet service (Comcast) and needed a
>>NIC for the  connection.  I purchased a Linksys LNE100TX ver. 5.1, which
>>seemed to be in wide use.   In order to get the service installed I
>>needed a Windows-based system, so I installed  WinXP, which turned out to
>>be painless.  In short order, I had the cable internet running  nicely,
>>Including a Belkin wireless router and bridge.
>>    
>>
>
>  
>
>>When I attempted to set up the NIC in Warp4, I encountered much trouble. 
>>The NIC  presence isn't recognized by NICPAK, so I chose the ADMTEK
>>package.  I first installed  the LNE100 driver, which hung during boot. 
>>I ran PCI.EXE and it found the NIC, but it  doesn't appear in the
>>hardware manager at all (should it?).  Since NIC.EXE displayed the  card
>>as an ADMTEK FastNIC, so I tried that driver as well, with the same
>>results (hang  during boot).
>>    
>>
>
>  
>
>>Cheers, Gordon
>>    
>>
>
>Gordon
>
>     Since you have covered the ADMTEK base, go buy yourself
>a good cheap NIC which uses the REALTEK 8139 chip.  The OS/2\eCS community
>has written its own high quality driver for this chip. Realtek gave us the
>specs.
>
>     HTH
>
>  
>
 From where may

I download this Driver??????????????? Thanx in advance!


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---