33.6Kbps Internal Voice and Speakerphone Pentium Windows Fax/Modem



New will only work with a Pentium and Windows 3.xx or Windows 95

won't work with my Cyrix P166+ and I don't use Windows

but have tested it with a Pentium and it works great.

Comes with software and manual,

software is still sealed.



$145.00



Please reply by netmail or

internet jofalco{at}zip.com.au



Joe.







Features



Data Modulation Protocol Standards Supported Speeds up to 115,200bps



ITU-T V.34bis; 33,600, 28,800, 26,400, 24,000, 21,600, 19,200, 16,800,
14,400, 12,000, 9,600, 7,200, 4,800, 2,400bps



ITU-T V.32bis; 14,400, 12,000, 9,600, 7,200, 4,800bps



ITU-T V.32; 9,600, 4,800bps



ITU-T V.22bis; 2,400bps (QAM)



ITU-T V.22; 1,200bps (DPSK)



ITU-T V.21; 300bps (FSK)



ITU-T V.23; 1,200/75bps (DFSK)



Bell212A; 1,200bps (DFSK)



Bell 103; 300bps (FSK)



Data Compression



ITU-T V.42bis



MNP Class 5



Error Correction



ITU-T V.42 LAPM



MNP 2-4



High Throughput Virtual UART, DTE rate up to 115,200bps



Auto Selector of COM Port and IRQ



Supporting Autobauds



Data/Fax/Voice Auto Detection



Direct ISA Bus Interface supporting both half- and full-card.



Supported by Windows 3.1 and WIN95



Low power consumption with auto-power management



Fax Modulation Protocol Standards Supported



Send and receive speeds up to 14,400bps



ITU-T V.17: 14,400, 12,000, 9,600, 7,200bps (TCM)



ITU-T V.29: 9,600bps (QAM) 7,200bps (QAM)



ITU-T V.27ter: 4,800bps (DPSK), 2,400bps (DPSK)



ITU-T V.21 Channel 2: 300bps (FSK)



Group 3



EIA Class 1



Tone and Pulse Dial support



Signal quality monitoring and auto retrain



Ties AT commands



Auto answer



Upgradable without ROM or EPROMs



Single crystal required



Pentium used; high-throughput



Voice



Answering machine



DTMF detection



Speakerphone (with auto system)



--- FMail 1.0g