R. Geoffrey Newbury schreef:

>>The USB drive shows up as drive N, after the two useless drive letters.
>>
>>DEVICE=H:\OS2\BOOT\USBKBD.SYS
>>DEVICE=H:\OS2\BOOT\USBMOUSE.SYS
>>rem DEVICE=H:\OS2\BOOT\USBCOM.SYS
>>BASEDEV=USBEHCD.SYS /v
>>BASEDEV=USBUHCD.SYS /v
>>BASEDEV=USBUHCD.SYS /v
>>BASEDEV=USBUHCD.SYS /v
>>BASEDEV=USBD.SYS /v
>>BASEDEV=USBHID.SYS /v
>>rem BASEDEV=USBPRT.SYS /LPT5
>>BASEDEV=USBMSD.ADD /A_USAGE:0 /FLOPPIES:1 /REMOVABLES:1 /V
>>rem BASEDEV=USBCDROM.ADD
>>    
>>
>
>Firstly
>AIUI there are 2 USB hardware chipsets. One uses usbehcd.sys and hte other
>usbuhcd.sys. So you should need one or the other but not both types of
>lines.
>
>  
>
Yu are confused by the USB1.1 *ohcd and the *uhcd types, of which it is 
the one OR the other indeed.
usbehcd (e stands for "enhanced")  is  USB2.00,  and usually you need 
usbehcd AND usbohcd (AMD mobo type) OR usbuhcd (intel mobo type).

>Secondly
>You should only need one instance of usbuhcd.sys to control one physical
>port.
>
Only, it's hard if not impossible to guess which which connector (mind 
the single) stands for which ports (mind the plural).

For the usbohcd AND usbuhcd types you need as much entries in the 
config.sys as there are ports.

> Unless you are using more than 1 port, you should only need 1 copy.
>Maybe the phantom entries are from that?
>
>  
>
Certainly not. Of course, when you disable USB the phantom drives might 
vanish too, but disabling USB isn't the aim I think.

-- 
Groeten uit Gent,

   Kris



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---