Hi Kris,

Kris Steenhaut  wrote:
Kevin Johnson schreef:

>I read the help os2scsi.dmd and I don't have a scanner attached, nor
any of the other items mentioned, it just explains that this is a
replacement for scsi.sys
... for the IBM scsi.sys interface, or devices build to the IBMscsi.sys 
interface. Of which you have none, that is quite clear now.


>The partitions I am using are accessed using Dani and were formatted
and labelled by ECSv1.1, all drives are lvm'd.
> 
I am confused and I'm afraid you are confused as well.

I hope not. I said I had 2 scsi disks of different sizes, which I changed
the smaller for the larger,  so I still only have one scsi drive which I do
not use to boot, just as safe storage away from the IDE channels.

SCSI card is a 2940 the larger drive now is a  IBM DRHS and no of course
they are accessed with Dani

 Didn't I see you 
saying you have 2 scsi hard disks in the system? If so, these aren't 
accessed using Dani. No way. Impossible.

>There was no help file for os2lvm.dmd


that's why I told you what is the purpose of that file.

And I appreciate that, I just wonder why there is no help file.

>I did swap out a new dvd r/rw with the original cdrom drive, as I did
notice losing the focus on the newer drive. That IDE channel consists of
now a CDrom drive and a dvd r/rw drive.
> 
> 
>
And what about the hard disks? What about the scsi drives you spoke about?

Ide boot drive and storage drive, are as they always were, unchange and
working fine under ECSv1.1 and Dani.

>With the present setup the ECSv1.1 works perfectly, and access to the
scsi drive is not a problem.
> 
> 
>
Please, do remember: dani drivers have any relation with scsi devices, 
and scsi harddisks don't need a specific driver.

> 
>What more information would help?
> 
>
Whether you ran lvm at the beginning of phase one, and saved the 
changes, even if it looked like there were no changes.

Maybe not, because since they were existing drives I may have assumed them
to be correctly LVM'd already.

I will have another go.

Thanks for your patience.
What I don't comprehend is that the present system works perfectly under
ecsv1.1, so if I migrate a copy of that to ECSv1.2, it don't, won't etc!
Regards

 

KevinJ.



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$4.98 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---