Kevin Johnson schreef:

> 
>I read the help os2scsi.dmd and I don't have a scanner attached, nor
any of the other items mentioned, it just explains that this is a
replacement for scsi.sys
>  
>
... for the IBM scsi.sys interface, or devices build to the IBMscsi.sys 
interface. Of which you have none, that is quite clear now.

> 
>The partitions I am using are accessed using Dani and were formatted
and labelled by ECSv1.1, all drives are lvm'd.
> 
>  
>
I am confused and I'm afraid you are confused as well. Didn't I see you 
saying you have 2 scsi hard disks in the system? If so, these aren't 
accessed using Dani. No way. Impossible.

>There was no help file for os2lvm.dmd
> 
>  
>
that's why I told you what is the purpose of that file.

>I did swap out a new dvd r/rw with the original cdrom drive, as I did
notice losing the focus on the newer drive. That IDE channel consists of
now a CDrom drive and a dvd r/rw drive.
> 
>  
>
And what about the hard disks? What about the scsi drives you spoke about?

>With the present setup the ECSv1.1 works perfectly, and access to the
scsi drive is not a problem.
> 
>  
>
Please, do remember: dani drivers have any relation with scsi devices, 
and scsi harddisks don't need a specific driver.

> 
>What more information would help?
>  
>
Whether you ran lvm at the beginning of phase one, and saved the 
changes, even if it looked like there were no changes.

-- 
Groeten uit Gent,

   Kris



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$4.98 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---