Milan Mastnak wrote:
>>So how does XP manage to make it work?
> 
> 
> Try the command "netstat -r" on both and compare them or
even post them here. Don't forget to tell what is your 
> network topology.
Topology?
W4-15 x 4 plus XP laptop either swapped for a wired box or wireless.
P-P LAN
Linksys BEFCMU10 cable modem

Is the DHCP log the DHCP info that was requested?  I think it is 
accurate.  I did not find a way to save or clip it, I had to type it.

Dl-514

D:\>netstat -r
   destination             router                netmask     metric 
flags intrf

127.0.0.1              127.0.0.1              255.255.255.255   0 
UH     lo
192.168                192.168.0.100          255.255.255.0     0 
UC   lan0

DHCP Mon message log

Initialized interface lan0
Sending REQUEST message
Client switching to REBOOTING state
Sending REQUEST message
Client switching to REBOOTING state
Sending REQUEST message
Client switching to INIT state
Sending DISCOVER message
Client switching to SELECTING state
Sending REQUEST message
Client switching to requesting state
New IP address obtained from server 192.168.0.100
Using lease from server 192.168.0.100
Recorded offer from server 192.168.0.1(192.168.0.100:604800
Assigned address to interface 192.168.0.100
Client switching to BOUND state
****************************************************************
Linksys BEFSX41

D:\1D>netstat -r
   destination             router                netmask     metric 
flags intrf

default                192.168.1.1            0.0.0.0           0 
UGP   lan0
64.63.192.17           192.168.1.1            255.255.255.255   0 
UGHW3   lan0
66.214.48.27           192.168.1.1            255.255.255.255   0 
UGHW3   lan0
127.0.0.1              127.0.0.1              255.255.255.255   0 
UH     lo
192.168.1              192.168.1.100          255.255.255.0     0 
UC   lan0
209.225.8.224          192.168.1.1            255.255.255.255   0 
UGHW3   lan0

DHCP monitor log same except address is 192.168.1.1
***************************************************************


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---