On Sat, 18 Dec 2004 19:27:09 +0100, Roberto Sozzani wrote:

>
>On Sat, 18 Dec 2004 11:51:08 -0500, Louis  wrote:
>
>> FWIW-After reading all this and having no SATA drive lights
>> on a Supermicro P4SPA-I checked the manual. It has two IDE
>> LED setups on the control panel, Pin 1=VCC5, Pin 3=IDE LED
>> Pin 5=IDE LED Pin 7-VCC5. I plugged a light onto 1 & 3 and
>> one on 5 & 7 in a tower with 10 drive lights and both work on
>> eCS 1.2, also on bootup. Another light show activity on the
>> Adaptec 29160 which runs several peripherals and a backup
>> drive. The system bios shows the SATA secondary IDE, so
>> it uses the standard IDE LED pins.
>
>My Abit KV8-Max3 is not as smart. I've checked all manuals but they
>show only two pins and say: "Connects to the HDD LED cable of chassis
>font panel"
>Nothing more. They don't say if this is for IDE or SATA too.
>


Same for my ABIT AN7


>On IDE channels I've only CDs, so I can't check if led works for IDE HD.
>

Same.  CD drives on ide 1 and 2 (14,15)


>PS: I don't understand what you mean with  "The system bios shows the
>SATA secondary IDE..."
>


Duncan Way



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$4.98 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---