* Forwarded (from: o2hardl) by mark lewis using timEd 1.10.y2k+.
* Originally from Bob Ackley to to-os2hardwarel.
* Original dated: Mon Mar 19, 06:32

While it isn't exactly an OS/2 problem, it is a PS/2 problem.

I'm trying to put an MCA Etherlink card in my PS/2 9595.  When the card is
in the machine the machine will not use the hard drives (SCSI drives), not
even the reference partition.  The same is true in a model 70, I can boot up
a reference floppy, but it doesn't see the ESDI HD.  Take the card out and
both machines work fine, HDs and all.  The card is a 3COM Etherlink MCA
card, card type ID is 6042.  There are several jumpers on the card, but I've
no idea what any of them do.
--
NOTE: NEW DOMAIN NAME! .ftn.wpusa.dynip.com UPDATE AS NEEDED!

| Fidonet:  Bob Ackley 1:2905/3
| Internet: Bob.Ackley{at}2905-3.ftn.wpusa.dynip.com
| via Waldo's Place USA FidonetInternet Gateway Site
| Standard disclaimer: The views of this user are strictly his own.

---


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---