Hello,
DF> Take a bit of advise from someone that's installed a good
DF> number of modems on Windozz95, don't let Doze autodetect
DF> your modem, set the modem as a standard 28,800 and you'll
DF> have absolutely no troubles in the future. Windoz tends to
DF> write to the modem's nvram during the setup and can really
DF> mess up a modem that has until the Windoz install run
DF> perfectly. If you can manually set (via jumpers, dip
DF> switches) port and IRQ on your modem, then just pick an
DF> appropriate Comm port and IRQ and tell Windoz where the
DF> modem is. If you have one of those "
DF> "Winmodems" then without a proper driver it's just another
DF> useless lump of semiconductors.
I never really had to mess much with jumpers on the modem itself, but I will 
give that one a try..  thanks for the input! ;)
Take Care,
George
---
---------------