Mike O'Connor wrote:
> Hi All,
>
> Does anyone have any recommendations for an AM2-socket motherboard, that 
> is fully compatible with OS/2-eCS - i.e has either on-board Video + NIC 
> + Sound with drivers available for our OS, or has sufficient PCI slots 
> to accommodate any of those that haven't?
>
> Regards,
> Mike
>
>   
ERR Yes - the one I am sending this from - the ASUS M2V-TVM. Onbaord 
SATA, USB 2.0, NIC, Audio and video work under OS/2.  Onboard video is a 
bit slow however so I have  an ATI Radeon X-550 PCI-express video card 
installed. This is probably the part that will cause you the most 
trouble getting. The X-550 is obsolete and its replacment is not 
supported by the old scitech drivers which are no longer being 
developed. Look around for a card that is listed - perhaps also look at 
what the new panorama drivers support, but I think they do not support 
3D (not that I use  that).

I got my complete pre-built system with this board from CCPU:

http://www.ccpu.com.au/

But you're probably going to have to shop around as this mother board is 
no longer listed on his site.

But all these shops apparently do (or can get within 1/2 days):  
http://www.shopbot.com.au/p-24626.html

Cheers/s

Ed.


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---