DF> Take a bit of advise from someone that's installed a good 
 DF> number of modems on Windozz95, don't let Doze autodetect 
 DF> your modem, set the modem as a standard 28,800 and you'll 
 DF> have absolutely no troubles in the future. Windoz tends to 
 DF> write to the modem's nvram during the setup and can really 
 DF> mess up a modem that has until the Windoz install run 
 DF> perfectly. If you can manually set (via jumpers, dip 
 DF> switches) port and IRQ on your modem, then just pick an 
 DF> appropriate Comm port and IRQ and tell Windoz where the 
 DF> modem is. If you have one of those "
Dennis --
One needs to "watch out" when installing a modem with a Rockwell chipset (see 
my message to George, following) ...  Sounds to me like ya really HAVEN'T 
installed a lot of modems with the Rockwell chipset...
God bless
                    -= Joe
Sphinx XLT/v1.1 * Variables won`t; constants aren`t.
                  ----------------------------------------
--- InterBBS 7.5
---------------