** Reply to message from rallee2{at}comcast.net on Sun, 11 Mar 2007 10:56:54 +0000

> There has to be another page separate from the one that displays
> "none,auto,manual" for *drives*.  The one you want is for
*chipset* and
> specifically the ide controller itself.  Some bioses have as many as 3
> different locations, main headers or pages, not just lines.

Their are several tabs across the top of the main menu, I have gone thru all of
them 'advanced' 'boot', 'power'.. The options for Translation method, SMART,
PIO Mode, Ultra dma mode, Multi-sector transfer only appear when 'user type
HDD' is selected instead of 'auto' on the main menu IDE selection. I've tried
the  'user type' with translation method without success.

As Mike O'Conner pointed out,  iRQ 14 is not being assigned to the IDE channel
and I'm thinking that is the root of the problem. I checked to make sure
Plug'n'Play is turned off as he suggested and it was.

-- 
Andre


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Great things are happening at Yahoo! Groups.  See the new email design.
http://us.click.yahoo.com/lOt0.A/hOaOAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---