In , on 01/17/05
   at 05:32 PM, S Zaveloff  said:

> > Go to System Setup-> PC Card Utilities-> Auto Configurator.
> > Select the modem card on the left (do all of them, since you
> > likely won't know which one will be configured), and Add them
> > to the right. Save, and exit. Now, your modem should work.

>I checked and all four modem entries had already been listed on the
>right.

That's probably most of the problem.  Attempting to configure all four is
typically going to fail on a laptop when you run out of free IRQs.  Figure
out which one you need.  It will be the next one after you built in COM
ports.  Most older laptaps have a since COM port, so you need to configure
COM2.  Configuring as port 2f8, IRQ 3 should work.  Get rid of the extra
entries and your probably will probably disappear.

HTH,

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.60b
#10183 Warp4/FP15/14.100c_W4
www.scoug.com irc.fyrelizard.com #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---