-=> Quoting JACK BESTRO to BARRY BURKE <=-
 BB>   If your charger dosen't have binding posts in the output chain, you 
an
 BB>   shove the meter leads into the battery connectors from the back.  Red 
to
 BB>   red, and black to black.  Set the meter on the 12 volt DC scale, if 
there
 BB>   isn't a 12 VDC scale, use the next higher one.  (15, 20, etc...)
 JB> By connecting a round lug around the output posts that are connected
 JB> to the multimeter I should be able to read out the voltage. But the
 JB> only problem is that I would be getting the voltage of the charger not
 JB> the battery.
   Close enough!  For our purposes, we only really care about RELATIVE 
   readings, mostly direction of travel of the voltage.
... Programmer (n): One who makes the lies the salesman told come true.
--- Blue Wave/Pro v2.12 [NR]
---------------