On 2017-11-09 08:56, jack4747@gmail.com wrote:
>>>
>>> You have to send it a wake-up signal. Write a 0 to register 0x6b.
>>>
>>> See
>>>
http://blog.bitify.co.uk/2013/11/reading-data-from-mpu-6050-on-raspberry.html
>>> for a python program
>>>
>
> the program in the page doesn't initialize the device.
> It's normal that it returns zeros.
>
> Check here, the initialize function:
> https://github.com/jrowberg/i2cdevlib/blob/master/Arduino/MPU6050/MPU6050.cpp
>
> Bye Jack
>


Ok, so I tried numerous python and c++ code (but for the one above -
needs arduino)
I also read that they MUST have 3.3v - but then again, someone wrote
that they can not work properly at 3.3 v - needs 5 v and voltage
regulator fixes it. Tried that too - luck

The chip is cheap so I ordered two more.
And I'll try to get my arduino nano work with it.

Thanks so far for all suggestions
--
--
Björn

--- SoupGate-Win32 v1.05