On Sun, 20 Feb 2005 14:40:52 -0500, bokeny{at}earthlink.net wrote:

>
>In , on 02/20/2005=20
>   at 11:12 AM, andrew{at}cci-29palms.com said:
>
>>BIOS set to boot from SCSI=A8  Tekram BIOS have boot from CDROM enabled=
=A8=20=20
>
>Correct.  In ASUS BIOS the following selected;
>1. Other Boot Device [SCSI/Onboard ATA Boot Device]
>2. Removable Device [Legacy Floppy]
>3. IDE Hard Drive [WDC....]
>4. ATAPI CD-ROM [None]
>


Zoltan,

Did you have the boot devices set as above when trying to boot from the=20
floppy/CD?  Or did you have:

1. Removable Device [Legacy Floppy]
2. ATAPI CD-ROM
3. Other Boot Device=20
etc....

If there is no bootable HD I think you will get the error and booting=20
will halt before it gets to the floppy or CD.=20

My OS/2 system has a DC-390U3 with an A7V333.  For some reason I have:

1. Removable Device [Legacy Floppy]
2. Other Boot Device [INT18 Device (Network)]
3. None
4. None

I just tried setting Other Boot Device to (SCSI/Onboard ATA Boot Device),=20
but it wouldn't boot!  Why I don't remember, it has been years since I set=
=20
this thing up - I keep telling myself to keep notes when setting up a PC!

Also remember that a SCSI CD will be booted by the Teckram Bios, so you=20
should not have ATAPI CD-ROM listed if your are trying to boot from a SCSI=
=20
CD.

HTH,

Stan Doda
dodas{at}sentex.net

=20












=20
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
=20




---