On 05-17-98, SUNDEEP GOEL was heard whispering... 
SG> MSGID: 6:606/26.0 355f6290 Hi,  
SG> I have just bought a Yamaha PSR 320 and I want to connect it to the 
SG> sound card in my computer.  
Buy a ready made cable. I see the other replys to your question, they are 
correct. You would do better to ask where to buy a cable by mail.
SG> I am not able to get the required cable here. So, have decided to 
SG> build one myself, could someone please tell me the wiring diagram for 
SG> the cable from the joystick / midi port on the sound card to the midi 
SG> in / out ports on the Yamaha.  
If you really want to build it yourself, do it. But this kind of small
item is not worth the trouble, unless you just want to prove you can build
it yourself.
_  3 Dave Gostl              7   847  78%  1:396/44  *!!!*
http://www.sstar.com/d/
... Ma is as selfless as I am.
/// ReJoinDer v1.4 ( Registered )
--- QScan/PCB v1.19b / 01-0154
---------------
Next conference: FIDO Message Area
Next topic: 152 Qedit

FIDO MESSAGE AREA==> TOPIC: 152 QEDIT         Ref: BG300001 Date: 12/01/94
From: TOM KLEIN                                             Time: 06:51am
\/To: JIM DAVIS                                           (Read 20 times)
Subj: initcaps

 +---------------------------------------------------------------+
 |On Thu. 12-01-94 JIM DAVIS wrote TOM KLEIN about "Upper Macro" |
 +---------------------------------------------------------------+
JD>  When I tried to compile the macro with this statement in my .UI
  >  file as per installion step 1. I received a error msg. complaining
  >  about doublely defined INIT_CAPS statement. Removing this statement
  >  cured that problem.
  I never checked the instructions since I always run this macro as a
  standalone macro.
  After re-reading the instructions I don't see why it would not work.
  I did not have time to check any further.
  Doublely defined? Did you put the macro into 'tse.ui' and also use the
  #include statement.  The #include statement is the same as inserting
  the file at the place of the #include and only attempting to do both
  should give you the error 'Attempting to re-define...'
JD> The version of initcaps.zip currently on the Semware bbs has
  > this corr- ected. (INITCAPS.ZIP 1440 05-07-93  By David Marcus.
  > > .
  The file dates are old but the macros may have been updated for
  release TSE 2.00.............I saw the old date and thought that it
  might still contain the old UpCase.  I will have to take a look at
  your changes some other time to see what you have done.  I am rushing
  to finish this message and post it before I leave.
>  \\\...tak     Thursday - December 1, 1994 at 0645 hrs
---
 þ QMPro 1.53 þ People will buy anything that's one to a customer.
--- FidoPCB v1.4 [ff151/a]
---------------