DS>     Thanks Dave.  I see that Midway has the Lee slug moulds for
DS>     $19.95. Now If I can just find something I need for $5.00 to
DS>     make the minimum.  hummmm
I just purchased the Lee 1 oz 12 ga slug mould.   It's typical
Lee poor quality.  I smoked the inside surfaces like the
instructions said, and it was a bitch getting the slugs to drop
from the core pin.   I cast them hard (wheelweights and
linotype) because that was what happened to be in the pot.  They
came out .680" to .683".    I also used Midway Drop Out Mould
Release, and that helped a *little* but it was still a bitch to
get the slug to separate from the center pin.  I whacked on it so
hard, one of the mould halves got outboard of the center pin
holder, and it was a bitch getting the thing back together.  The
Lyman roundball and slug moulds are twice the price of the Lee
slug mould, but in this case, I can testify that you get what you
pay for.
I forget what the roundballs weigh, exactly.  But I'd suggest
trying the .662" and .690" roundballs before messing with this
piece of crap Lee slug mould.
---
 þ SLMR 2.1a þ "_______ÚÚÚ_¢.•_¿¿¿________" I see you.....
(1:231/875)
---------------