For the last two weekends I am fighting the eCS v1.2 installation.  Note:
This is not an eCS problem!

Hardware - ASUS A7V333 main board, Tekram DC-390U2W, 2 IBM SCSI drives,
Plextor CD-ROM, 1.44 floppy drive, 4 IDE fixed drives.  No other boards
besides video in the machine.

Tekram BIOS loads, recognizes the attached three SCSI devices.

I can boot the machine with a salvaged IDE hard drive with eCS 1.0
installed.  All SCSI drives can be accessed from eCS.

Trying to install from floppy drive I receive 'Read Error!' as message.

Placed W2k into the CD-ROM drive, nothing happens with the CD, the
computer goes past everything than displaying the Boot Manager menu.

----

Is there a way to install eCS 1.2 while the computer is running eCS 1.0?

Any help would be appreciated.

Regards,
Zoltan

--
Zoltan Bokeny 
bokeny at earthlink dot net
OS/2 Warp 4 / eCS 1.2 - MR/2 ICE V2.67 #20296
FAPCUG - POSSI - SCOUG - TOUG - VOICE
Fayetteville, North Carolina



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---