andrew{at}cci-29palms.com wrote:

> 
> 
>> I had done the first two items you mentioned but not the third, so 
>> I moved the scsi statement ahead of the ibm one but the result was 
>> the same.  When I put in the third floppy the screen fills wirh 
>> text that scrolls off so fast I can't read it and I am left with 
>> the message that OS/2 cannot operate the hard dirve.
> 
> 
> I assume the controller sees the harddrives okż
> 

Andrew,

Yes it does.  As a test I have actually installed ecs 1.2 on this
machine , installing both from the cd and floppies.

> Maybe one of the other drivers in the config.sys is intefering, 
> there's a lot of extra ones on the boot floppy.

Maybe.  When ecs installed it used the aicu160.add so that is what I put
on the install floppies for WSeB.  I am going to start over and remake
the install floppies and re modifiy them.  I will take all the adaptec
stuff off of them and out of config.sys and the snoop.lst and see what
happens.

Regards,  Jim


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---