Paul Smedley wrote:
> Hi All,
> 
> Since installing a new 80gb Western Digital 5400rpm hard drive in my 
> laptop (replacing the 40gb, 4200rpm drive) when I start up I'm often 
> getting a Trap 8 just after os2lvm.dmd loads.  If I restart a couple of 
> times, the system does startup and work perfectly.
> 
> WinXP starts up 100% of the time...
> 
> Any suggestions what could be causing this?
> 
> Laptop is an Acer Travelmate 291Lmi with an Intel Centrino 1.4 & 512mb 
> ram.  Currently using danis506.add but will try with ibm1s506 to see 
> what happens..
> 
> Cheers,
> 
> Paul.
> 

  Hi Paul,

     TRAP0008 is usually two errors occuring at the same time. The usual 
culprits are memory and drivers. Could you have dislodged the memory 
Dimms when installing the new drive ?  Try removing them (with 
anti-static protection of course) and re-seating them. Also if you have 
changed any drivers change back to the previous version.

   Cheers/2

     Ed.


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---