Stephan E. Bucher schreef:

> In eCS 1.2 the 
>drive letter only appears in the list when a medium is 
>connected/inserted and after executing the "Refresh removeable media" 
>command.
>
Right indeed. (-:

However, it is even more complicated:

On my main system:
My 3 scsi jaz devices have immediately the drive letters immediately 
after the "real" hard disks...

> Whichever device is used first is assigned "E", the next
"F".
>Stephan
>  
>
... and after  inserting an USB stick, I'm getting a worthless "floppy 
drive" drive, and only after
clicking onto "Refresh removeable media" I'm getting the real thing 
(while the floppy drive symbol remains).

HOWEVER, On my TP41 laptop (the very same eCS1.2 installed):

- at boot up, my scsi Jaz, like as at my main system comes  up 
immediately after  the last "real" harddisk  (again, as it should).
- at  boot up the  (same) USB stick gets it's drive letter only  after a 
click onto "Refresh removeable media". And here I don't get that 
annoying floppy drive letter prior to the USB drive letter.

Both systems do have exactly the same config.sys entry:

BaseDev=USBMSD.ADD /floppies:0 /removables:6 /force_to_removable /v


Bottom line is me thinks, USB removable disks support under eCS is still 
rather unstable.


-- 
Groeten uit Gent,

   Kris




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/E8folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---