I recently bought a Seagate Barracuda Model ST 150176LC from Surplus
Computers on the web.  As I was starting to install it the first thing I
noticed was the connector on the scsi cable was about a half inch
smaller than the connection on the back of the drive.  Then I saw that
there was no place on the drive to connect the power.

Looking closer at what I thought was the scsi connection point I see
that there is a piece of plastic that divides the receptical in half.
It looks like it should be plugged into a card rather than a cable.

I downloaded the manual for the drive and the installation section shows
a picture of the scsi connection  on the left and the power connection
on the right.  The drive I have has its connection centered.

Has anyone else seen anything like this before?  I am wondering if they sent
me a drive for some kind o special installation.

Regards,  Jim


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---