-=> Joe Delahaye wrote to Bill McGarrity <=-

Hiya Joe...


 BM> The issue is with Zone Blind toggle.  If I don't want one network's
 BM> addresses to appear in the seen-by and path lines of another, should that
 BM> toggle be "enabled" or "disabled"? If enabled,
that brings us to another
 BM> issue that I was told to add a 4 at the end of the Zone_Blind in the
 BM> sbbsecho.cfg file.  I am assuming that means the first 4 zones should be
 BM> considered as one.  Over the past few weeks with the issues of the INTL
 BM> kludge line in echomail (which was determined sbbsecho was not to blame)
 BM> my head is spinning.... not that it doesn't normally spin anyway.


 JD> The way to use it as we have for international traffic Bill, is how I
 JD> mentioned it to you.  If you toggle Zone Blind on again, you will run
 JD> into seen by problems again.

Nick just told me differently... and I edited sbbsecho.cfg to Zone_Blind 4. 
I'll make one more test... this is nuts... lol!!

Thanks..


Bill

Telnet: bbs.tequilamockingbirdonline.net
Web: bbs.tequilamockingbirdonline.net
IRC: irc.tequilamockingbirdonline.net Ports: 6661-6670 SSL: +6697
Radio: radio.tequilamockingbirdonline.net:8010/live


... Motorcycles are everywhere... Look twice, save a life!!
--- MultiMail/Win32 v0.50