--- In os2hardware{at}yahoogroups.com, "Jon Harrison"
 wrote:
> On Wed, 23 Mar 2005 02:09:00 -0000, David Graser wrote:
> 
> > The latest IBM USB (10.145) drivers work fine
> >without having the USB devices plugged in on bootup.  I have numerous
> >USB  devices that I plug and unplugged all the time when in
eComStation.
> 
> I have a card reader that works fine in eCS v1.1 on a P3 but w/ eCS
> v1.2 on a ASUS SMP board it does not work, even with the 10.145
> drivers.
> 
> Jon

Does this board require the 

BASEDEV=USBUHCD.SYS

and not the 

BASEDEV=USBOHCD.SYS

Most problems I have seen posted are when the board requires the

BASEDEV=USBUHCD.SYS driver.

David





 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---