On Sun, 27 Mar 2005 19:59:21 -0800 (PST), Franklin wrote:

>Is your OHCI controller mounted up in ECS? Should show up in the
>hardware manager. Other USB devices show up? I have a lot of problem
>now with running out of IRQs in my machines. Each channel takes an IRQ,
>and some devices refuse to share IRQs. The chaintech/intel motherboard
>I have now has 3 usb2 channels on boar

Franklin:

Interesting point.  My usb controller is using irq11, the same IRQ
is used by my 2 scsi controllers.  The usb device monitor shows the
SanDisk when it is connected, but the SD port does not mount as a
drive when the card is plugged in.

I can see my camera with no problem on it's usb cable, just cannot
see a card in the sandisk 12:1 which has 6 ports.

Jon





 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---