--- In os2hardware{at}yahoogroups.com, "jmurthy"  wrote:
> 
> I just bought a Transcend 256 MB USB memory stick and have some basic
> questions about USB and the drive.
> 
> 1) My Config.Sys USB statements are as follows:
> BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:1 /V
> BASEDEV=USBEHCD.SYS /V
> BASEDEV=USBUHCD.SYS /V
> BASEDEV=USBD.SYS
> BASEDEV=USBHID.SYS
> This gives me an E and an F drive which I can't seem to do anything
> with. When I plug in my pen drive, I get an H drive (G is attached by
> NDFS). What are the E and F drives?
> 
> 2) When I plug in the pen drive, I get a popup saying H drive attached
> and when I pull it out I get another popup saying that it is has been
> disconnected and loss of data may result. How do I stop the USB drive
> to pull out the drive?
> 

If you have the following statement in your config.sys file. 

BASEDEV=OS2PCARD.DMD

it can cause two 96 MB drives to be shown. 

David 





 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---