--- Jon Harrison  wrote:
> 
> On Sat, 26 Mar 2005 20:09:27 -0800 (PST), Franklin wrote:
> 
> >I have a usb 6 card reader that shows
> >up as two drives that I can transfer pictures from my Kodak cameras
> >into ECS. As for plugging the camera itself in, I gave it a try. ECS
> >recognizes the camera, Refresh Removeable Media actually thinks
> about
> >it for a few seconds before it just doesn't mount it,
> 
> I just bought a Nikon 4200.  The camera works great for transfers. 
> It's the card reader that doesn't work for me.  It works fine on
> the 1 computer that uses a UHCI controller, but not on this
> computer which has an OHCI controller.  This is probably a driver
> issue since this card reader is compatible with both types of
> controllers.  I have the latest drivers installed.
> 
> As for your camera, try booting with your card reader unplugged and
> then plug in the camera.   Is is recognized when the card reader is
> removed?  If so, maybe you need to increase the parameter in your
> config.sys.  The default is 1, I believe.  Since you have a 6
> banger, try setting the parameter to 7 (6+camera).

It has two slots that cover the six cards it can read, so two devices.
I have BASEDEV=USBMSD.ADD /REMOVABLES:3 /V
This covers the two devices and one more. It works with the external
hard drive, and as  I noted, the camera showed up in LVM. It's most
likely a non-standard interface.

Franklin


		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/ 


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---