Felix Miata wrote:

>David Graser wrote: 
>  
>
>> Does this board require the
>
>> BASEDEV=USBUHCD.SYS
>
>> and not the
>
>> BASEDEV=USBOHCD.SYS
>
>> Most problems I have seen posted are when the board requires the
>
>>BASEDEV=USBUHCD.SYS driver.
>>    
>>
>Which of the two are required is entirely dependant on your hardware. No
>motherboard requires both, but will function properly only with the
>correct one.
>  
>
Hi Felix,

Keeping in mind that the motherboard controller may not be the same one 
required for an add-in PCI [USB 2.0] card - e.g. motherboard only has a 
UHCI controller, whereas the PCI card has EHCI and OHCI-compliant 
controllers.

-- 
Regards,
Mike

Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------
[ISP blocks *.exe, *.cmd, *.com, *.bat, *.reg attachments]
[Please use zipped versions of above]



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---