On Sat, 26 Mar 2005 20:09:27 -0800 (PST), Franklin wrote:

>I have a usb 6 card reader that shows
>up as two drives that I can transfer pictures from my Kodak cameras
>into ECS. As for plugging the camera itself in, I gave it a try. ECS
>recognizes the camera, Refresh Removeable Media actually thinks about
>it for a few seconds before it just doesn't mount it,

I just bought a Nikon 4200.  The camera works great for transfers. 
It's the card reader that doesn't work for me.  It works fine on
the 1 computer that uses a UHCI controller, but not on this
computer which has an OHCI controller.  This is probably a driver
issue since this card reader is compatible with both types of
controllers.  I have the latest drivers installed.

As for your camera, try booting with your card reader unplugged and
then plug in the camera.   Is is recognized when the card reader is
removed?  If so, maybe you need to increase the parameter in your
config.sys.  The default is 1, I believe.  Since you have a 6
banger, try setting the parameter to 7 (6+camera).

Jon



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---