--- Jon Harrison  wrote:
> 
> On Sun, 27 Mar 2005 19:59:21 -0800 (PST), Franklin wrote:
> 
> >Is your OHCI controller mounted up in ECS? Should show up in the
> >hardware manager. Other USB devices show up? I have a lot of problem
> >now with running out of IRQs in my machines. Each channel takes an
> IRQ,
> >and some devices refuse to share IRQs. The chaintech/intel
> motherboard
> >I have now has 3 usb2 channels on boar
> 
> Franklin:
> 
> Interesting point.  My usb controller is using irq11, the same IRQ
> is used by my 2 scsi controllers.  The usb device monitor shows the
> SanDisk when it is connected, but the SD port does not mount as a
> drive when the card is plugged in.
> 
> I can see my camera with no problem on it's usb cable, just cannot
> see a card in the sandisk 12:1 which has 6 ports.

Also I wonder if you have the latest usb MSD driver. My card reader
doesn't work with older. Check the ECS site and make sure.

Franklin


		
__________________________________ 
Do you Yahoo!? 
Make Yahoo! your home page 
http://www.yahoo.com/r/hs


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---