Anthony, at 21:28 on Mon, Jun 13 1994, you wrote to Paul Edwards ...

AM> What workarounds do I have to implement to get 1.1 working as a drop 
AM> in replacement for 1.01.  You know, like the capitalised something or 
AM> other zip files...

Simply use the new compress.cfg file which comes with the Squish archive, 
as it will work under both DOS and OS/2 as it comes.  Otherwise, remove 
the -U parameter from the Unzip option in your current file.

 AM> Tell me what to modify in which cfg files and I'll use 1.1. 

The following is what I use, and although your existing 1.01 squish.cfg 
should work just fine, there are a couple of additions (commented) you 
might care to make to yours.  Apart from these additions, I am using the 
same config file with 1.10 as I did with 1.01 ...

Address 3:640/305.9
Address 3:711/934.18
Address 30163/9
NetFile c:\point\inbound\prot
NetFile c:\point\inbound\known
NetFile c:\point\inbound\unknown
BinkPoint
BatchUnarc                           
Compress c:\point\compress.cfg
Routing  c:\point\route.cfg
Outbound c:\point\outbound
LogFile  c:\point\squish.log
DupeCheck Header MSGID        ; This is a new option.
LinkMsgid                     ; And so is this.
LogLevel 6
CheckZones
QuietArc
Duplicates 1000               ; Keep this low to conserve memory.
KillBlank
KillDupes                     ; Optional.
Pack Zip 640/305
Pack Zip 711/934
DefaultPacker Zip
SaveControlInfo
ForwardTo World
ForwardFrom World
TossBadMsgs
StripAttributes
TinySeenbys
Buffers Large
Origin Pearl Beach, NSW
[ ... ]

See, there's nothing to it Amfony.  ;-)

Regards, Bill

--- Msgedsq 2.2e