--- "Beregond. Anders Stenström"  wrote:

> Gerry Chilibeck wrote:
> 
> > My NIC would not work if I had more than 3 USB ports config'ed in 
> > config sys. Suggestions were that there is a irq conflict but I
> never
> > bothered to trace that down as I do not need all that many USB's.
> > So, you may want to try remming out all your USB stuff and give the
> NIC
> > another try.
> 
>     I have now experimented along this line. It made a difference,
> but
> did not solve the problem. Before, the NIC was like dead. Now, I get
> a "did not get DHCP parameters" message at every boot.
>     Of course, there may be something wrong with the connector.

Are you attached to a network that has DHCP?

Franklin

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---