CA> The amount of time required for the roller to
 CA> slip would repeat the same cycle until the roller
 CA> is reduced in size beyond being used for it's
 CA> intended purpose.
 
> At which time you cut a slice of an old 28"
> bicycle tube, invert it, then stretch tightly
> over roller. The inner surface is usually quite
> rough enough, works well in many printers with
> dried up (or gummy) rollers, and there's plenty
> of tube left for future replacements.
 
 [G]
 
 Now =that's= ingenuity!
 
 
 
 
 

--- Maximus/2 3.01