-=[ On 03-08-16 15:26, Sergey Poziturin wrote to Robert Wolfe below: ]=-
-=[ Re: Warp 4 & VirtualBox ]=-

Hi Sergey Poziturin!

 SP> Hello, Robert Wolfe.
 SP> On 06.03.16 23:31 you wrote:

 RW> So, I somewhat successfully installed Warp 4 in a VirtualBox
 RW> scenario. The only issue I had was getting the OS/2 Additions up
 RW> and working like they should, which resulted in me only have Warp
 RW> 4 run a 640x480 resolution, whcih was crap :) Has anyone else been
 RW> able to do a successful OS/2 Warp installation into a VirtualBox
 RW> (current release) virtual machine?

Virtual Guest Additions Driver for OS/2 (Beta)

 -	the generic VESA gradd driver is being used (gengradd)
Updated installation instructions:
-	boot to the OS/2 command prompt (alt-f1 while the white blob is displayed
during early boot, then f2) 
-	copy all files into the directory c:\OS2Additions
make a backup copy of c:\os2\dll\gengradd.dll 
-	copy our gengradd.dll to c:\os2\dll
-	copy libc06*.dll to c:\os2\dll
-	comment out the 'device=c:\os2\boot\mouse.sys' line in c:\config.sys (put
'rem' in front) 
-	append 'device=c:\OS2Additions\ vboxguest.sys' to c:\config.sys
append 'device= c:\ OS2Additions\ vboxmouse. sys' to c:\config. sys 
-	add 'c:\OS2Additions\ VBoxService.exe' to the start of c:\startup.cmd
-	reboot

You need to do this manually so I suspect that you haven't installed the video
driver properly if your not getting higher than standard VGA resolutions.

Cheers,

     Bryan 
     Email: bhandfield(at)me(dot)com

... Many receive advice, only the wise profit by it.

--- MultiMail/Darwin v0.49
--- SBBSecho 2.26-Win32