Hello, Wayne.

You recently asked about using PC133 SDRAM DIMM memory to replace PC100.

Since your Celeron 433 runs at 66MHz x Clockmultiplier 6.5, Even PC66
would work, and PC100 or PC133 should work OK in there also.  I'm
talking about sizes like 128MB, and in general.  Best check the owner's
manual from HP for maximum size DIMM supported by your model, and for
any other special requirements.

I dunno if there is an OfficeMax or a Staples near you, but fliers in
today's paper over here had pretty good after-rebate prices from both of
those for DIMMS.

- - -  JimH.
--- Platinum Xpress/Win/WINServer v3.0pr5