In , on 08/08/05
   at 02:49 PM, msnyder1{at}cfl.rr.com said:

>The usbcomm.txt file says to add /N:COM2 to the usbcom.sys line, which I
>have done.  Other than that, the .txt files don't help much.  Suggestions
>on how to make this work, please.

The docs and driver naming leave a bit to be desired.

The Belkin needs only usbser.  usbcom is only for USB modems.

Use:

  DEVICE=C:\OS2\BOOT\USBSER.SYS /V

Replace C: with your boot drive.  If all goes well, you should get COM5
assigned.  If not, you have detection problems and you need to use usbres
to ensure that the Belkin is properly detected.

COM2 will not be available unless you REM out COM.SYS.

Regards,

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.67
#10183 Warp4.something/14.100c_W4
www.scoug.com irc.fyrelizard.com #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---