Ed Durrant wrote:
> 
> Jim Byrnes wrote:
> 
> 
>>I have an IBM IntelliStation M Pro smp machine that has ecs 1.2 smp 
>>installed and I can get no sound.
>>
>>The onboard sound is AC97.  I am assuming the problem is because onboard 
>>audio, scsi and usb are all on irq 11. Note: the scsi works and so does 
>>the usb. In the bios the only irq's I can seem to change are the serial 
>>and parrall ports.  I just flashed the bios to the latest version on the 
>>IBM site and this has not changed.
>>
>>Does anyone know away to fix the irq conflict on this machine?
>>
>>One possible fix that comes to mind is to disable on board sound and 
>>install a sound card, but I don't know enough about hardware to be sure 
>>this would work.
>>
>>Thanks,  Jim
>>
>>
>> 
>>
> 
> Uniaud does support 100% of all AC97 chipsets - are you usung a native 
> OS/2 Audio Driver or relying on UniAud ??
> 
> Cheers/2
> 
> Ed.
> 

Ed,

Using the default as installed by ecs 1.2 which I assume is UniAud.

Regards,  Jim



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---