dwhawkinson schreef:

>The printer works under eCS 1.1 , but not under Warp 3.
>
>Under Warp 3 , I can have both interfaces connected and print
>via the parallel port.   If I try that under eCS , the USB port
>is shown as detached.
>
>
>  
>
?
That's what I would call "a conflicting information".

Anyway, supposed the latest usb drivers + USB print had been installed, 
sometimes you have to reboot to trigger "Detached" into
"Attached".

I'm not sure whether the Warp 3 kernell files can work properly together 
with the latest USB though.


-- 
Groeten uit Gent,

   Kris

http://www.taartenbakkerij.com/bestanden/warpstock-europe-2005-dresden.jpg
http://www.taartenbakkerij.com/bestanden/zum_weberplatz.jpg



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---