In , on
08/03/05
   at 09:50 PM, "Don(ald) O. Woodall"
 said:

>     We need to cover this more at a later date.  You have
>not yet convinced me.

OK. :-)

>> ifconfig lan0

>>and

>> ifconfing lan1

>     These do not tell me, or show what I want to see.

It will once you recall that protocol.ini defines the assignment of the
logical LANx values to physical NICs.  For example:

[TCPIP_NIF]

   BINDINGS = E100BEO2_NIF,E1000_NIF
   DriverName = TCPIP$

The 100MB NIC is LAN0 and the 1GB NIC is LAN1.

In your case, only your 1st NIC is configured and usable.

NETBIOS adapter assignments are similar. but the syntax differs:

[NETBIOS]

   DRIVERNAME = NETBIOS$
   ADAPTER0 = TCPBEUI$,0
   ADAPTER1 = NETBEUI$,1


Regards,

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.67
#10183 Warp4.something/14.100c_W4
www.scoug.com irc.fyrelizard.com #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---