On 08/09/05 at 09:07 PM, Steven Levine  said:


>Not at all.  My experience is that if com.sys is loaded first, it grabs
>COM1 to COM4 even if there is no hardware attached.  This means that
>usbser will grab COM5 and that's where your modem will be.

>Is this what you are seeing?

No.  com.sys takes the hardware serial port at COM1.  Then usbser.sys
takes COM2 for the USB device.


>What you might want to do is start pmfax with the -v option.  This will
>generate a nice fat debug trace call vout.log or something similar.

>>The
>>modem is a cheap external one that I got a couple of years ago when
>>motherboards stopped coming with AT slots.  It purports to have an Intel
>>chipset, though God knows which one.  Its a Prime Peripherals V.90 56K
>>Fax Modem.

>You might need to twiddle with some of the settings discussed in the
>pmfax readme.

>Also, sometimes it helps to limit the speed to 9600.

I finally got the modem to send a fax, but only by connecting it to the
serial port and loading the fmd.sys driver as well as com.sys.  That's not
really what I wanted to do, because I don't need for it to be connected
and on all of the time.

I tried it again with the usbser.sys driver loaded and the com port and
fmd.sys disabled.  There is a page end error quite a few lines into the
transmission, and then everything seems to be errors.

Here is a log of one failure through the USB to Serial adapter.  It starts
when I printed a note to the FXPrint driver.  Apologies to those who don't
want to read this.  At least it's only text. :-)

08/10 08:54:16.06 '1 play: wave
08/10 08:54:16.06 '1 open log
08/10 08:54:16.06 '1 open disp
08/10 08:55:39.80 '3 pipe_thread Version 3.2 open
08/10 08:55:39.80 '3 pipe_thread popup |0|410|1|Print|
08/10 08:55:39.80 '3 fax_popup 0 410
08/10 08:55:39.86 '1 popup |410|1|Print|
08/10 08:55:56.53 '1 just log 
08/10 08:55:56.54 '1 autoload #410
08/10 08:55:56.54 '1 set_display 1, 0
08/10 08:55:56.54 '1 set_display 1, 0
08/10 08:55:56.54 '1 set_display 0, 1
08/10 08:55:59.04 '1 play: wave
08/10 08:55:59.05 '1 open log
08/10 08:55:59.05 '1 open disp
08/10 08:56:06.67 '1 open log
08/10 08:56:06.67 '1 open disp
08/10 08:56:16.80 '2 pend check avl
08/10 08:56:16.80 '2 dispatch `0 #410 to fax 
08/10 08:56:16.80 '2 lgc
08/10 08:56:16.80 '2 pend=0 togo=60 nrte=0
08/10 08:56:17.82 '4  mode check
08/10 08:56:17.82 '4  send  `0 #410 pgs0+1 flgs000a rty5
08/10 08:56:17.82 '4  'Fax sending #410 calling 1st Florida State
Mortgage, Melbourne' 08/10 08:56:17.82 '4  name='' co='1st Florida
State Mortgage, Melbourne' fax='752-5161' 08/10 08:56:17.82 '4  header
'D:\faxworks\$PH00086.004'
08/10 08:56:17.82 '4  into fax_send pgs1 skp0
08/10 08:56:17.82 FmlConfigure
08/10 08:56:17.82 FmlOpen COM2, build 3.01.02j
08/10 08:56:17.82 [2] CLASS1+CHKTCF+EOPDLY 9600 COM Shr
08/10 08:56:17.82 [2] rxq 8192, txq 8192
08/10 08:56:17.82 [2] wt/o 5000ms
08/10 08:56:17.94 [2] put_command 'ATZ\r'
08/10 08:56:17.94 [2] wait_for 'OK\r?' or '`0\r' 3sec
08/10 08:56:18.05 [2] 
08/10 08:56:18.07 [2]  =
08/10 08:56:18.07 [2] put_command 'AT&F\r'
08/10 08:56:18.07 [2] wait_for 'OK\r?' or '`0\r' 3sec
08/10 08:56:18.16 [2] 
08/10 08:56:18.18 [2]  =
08/10 08:56:18.18 [2] put_command 'ATH0\r'
08/10 08:56:18.18 [2] wait_for 'OK\r?' or '`0\r' 3sec
08/10 08:56:18.29 [2] 
08/10 08:56:18.31 [2]  =
08/10 08:56:18.31 [2] put_command 'ATE0M1L2V1X4S0=0&D3\r'
08/10 08:56:18.31 [2] wait_for 'OK\r?' 5sec
08/10 08:56:18.46 [2] 
08/10 08:56:18.48 [2]  =
08/10 08:56:18.48 [2] modem_init rc 0
08/10 08:56:18.48 [2] put_command 'ATS7=100\r'
08/10 08:56:18.48 [2] wait_for 'OK\r\n' 5sec
08/10 08:56:18.60 [2]  =
08/10 08:56:18.60 [2] put_command 'AT+FCLASS=1\r'
08/10 08:56:18.60 [2] wait_for 'OK\r\n' 5sec
08/10 08:56:18.73 [2]  =
08/10 08:56:18.83 [2] put_command_19 'AT\r'
08/10 08:56:18.89 [2] 
08/10 08:56:20.07 [2] class1_speeds
08/10 08:56:20.07 [2] put_command_19 'AT+FTM=?\r'
08/10 08:56:20.07 [2] wait_for 'OK\r\n' 3sec
08/10 08:56:20.15 [2] 
08/10 08:56:20.15 [2]  =
08/10 08:56:20.15 [2] 0 2400bps mod 24 V.27 ter
08/10 08:56:20.15 [2] 1 4800bps mod 48 V.27 ter
08/10 08:56:20.15 [2] 2 7200bps mod 72 V.29
08/10 08:56:20.15 [2] 4 9600bps mod 96 V.29
08/10 08:56:20.15 [2] speed 4
08/10 08:56:20.15 [2] fax_init rc 0
08/10 08:56:20.15 [2] FmlDial '7525161'
08/10 08:56:20.15 [2] put_command_19 'ATDT7525161\r'
08/10 08:56:20.15 [2] wait_for 'CONNECT\r\n' 105sec
08/10 08:56:20.89 '1 set_display 1, 0
08/10 08:56:20.89 '1 set_display 0, 1
08/10 08:56:33.11 [2]  =
08/10 08:56:33.11 [2] FmlSendTiffF 'D:\faxworks\FX000410.FAX' 08/10
08:56:33.11 [2] tiff header offset 8 length 1651 08/10 08:56:33.11 [2]
tiff offset 8 length 13168
08/10 08:56:33.11 [2] FmlBeginPage
08/10 08:56:33.11 [2] FmlSendData 1651
08/10 08:56:33.11 [2] class1_negotiate_ini
08/10 08:56:33.11 [2] class1_get_frames
08/10 08:56:33.11 [2] wait_for 'OK\r\n' 3sec
08/10 08:56:35.24 [2] <\xFF^C \x00\x001 \xEE\xB8\xC4\x80\x85\x80\x80\x80
\x84\r\xDD\x00\x00\xDD\xDD\x00\x00\xDD\xDD\xDD\xDD\xDD\x00\xED!\xB0\x00\x00
08/10 08:56:35.24 [2]  =
08/10 08:56:35.24 [2] RMSG: NSF
08/10 08:56:35.24 [2] put_command_19 'AT+FRH=3\r'
08/10 08:56:35.25 [2] wait_for 'CONNECT\r\n' 6sec
08/10 08:56:35.28 [2]  =
08/10 08:56:35.28 [2] wait_for 'OK\r\n' 3sec
08/10 08:56:35.94 [2]  08/10
08:56:35.94 [2]  =
08/10 08:56:35.94 [2] RMSG: CSI
08/10 08:56:35.94 [2] id=''
08/10 08:56:35.94 [2] put_command_19 'AT+FRH=3\r'
08/10 08:56:35.94 [2] wait_for 'CONNECT\r\n' 6sec
08/10 08:56:35.97 [2]  =
08/10 08:56:35.97 [2] wait_for 'OK\r\n' 3sec
08/10 08:56:36.36 [2] <\xFF^S\x80 \xEE\xB8\xC4\x80\x85\x80\x80\x80
\xD7^R^P^C\r\n> 08/10 08:56:36.37 [2]  =
08/10 08:56:36.37 [2] RMSG: DIS
08/10 08:56:36.37 [2] fine capability
08/10 08:56:36.37 [2] pad = 10ms
08/10 08:56:36.37 [2] extend-24
08/10 08:56:36.37 [2] extend-32
08/10 08:56:36.37 [2] extend-40
08/10 08:56:36.37 [2] extend-48
08/10 08:56:36.37 [2] fnl
08/10 08:56:36.47 [2] class1_put_frame_cmd_con_ok_fnl
08/10 08:56:36.47 [2] put_command_19 'AT+FTH=3\r'
08/10 08:56:36.47 [2] wait_for 'CONNECT\r\n' or 'OK\r\n' 1sec 08/10
08:56:36.66 [2]  =
08/10 08:56:36.66 [2] XMSG: DCS
08/10 08:56:36.66 [2] negbps = 9600
08/10 08:56:36.66 [2] negpad = 10ms
08/10 08:56:36.66 [2] put_data_19 '\xFF^S\x83\x00F\xA8\x00^P^C' 08/10
08:56:36.66 [2] wait_for 'OK\r\n' or 'CONNECT\r\n' 5sec 08/10 08:56:38.05
[2]  =
08/10 08:56:38.05 [2] ntcf = 1800
08/10 08:56:38.05 [2] class1_delay
08/10 08:56:38.05 [2] put_command_19 'AT+FTS=8\r'
08/10 08:56:38.05 [2] wait_for 'OK\r\n' 1sec
08/10 08:56:38.16 [2]  =
08/10 08:56:38.16 [2] class1_datamode
08/10 08:56:38.16 [2] XDAT: TCF
08/10 08:56:38.16 [2] put_command_19 'AT+FTM=96\r'
08/10 08:56:38.16 [2] wait_for 'CONNECT\r\n' 2sec
08/10 08:56:38.28 [2]  =
08/10 08:56:38.28 [2] h/s 9 f/r 65
08/10 08:56:38.28 [2] wt/o 33000ms
08/10 08:57:22.82 [2] wait_for 'OK\r\n' 5sec
08/10 08:57:22.82 [2]  =
08/10 08:57:22.82 [2] h/s off
08/10 08:57:22.82 [2] wt/o 5000ms
08/10 08:57:22.82 [2] error: page end and 42461 bytes remaining 08/10
08:57:22.82 [2] class1_get_frames_cmd
08/10 08:57:22.82 [2] put_command_19 'AT+FRH=3\r'
08/10 08:57:22.82 [2] command write error rc 21, w 9, w2 0
08/10 08:57:22.82 [2] speed 2
08/10 08:57:22.82 [2] class1_put_frame_cmd_con_ok_fnl
08/10 08:57:22.82 [2] put_command_19 'AT+FTH=3\r'
08/10 08:57:22.82 [2] command write error rc 21, w 9, w2 0
08/10 08:57:22.82 [2] tiff send failed (-9)
08/10 08:57:22.82 [2] class1_disconnect
08/10 08:57:22.82 [2] class1_put_frame_cmd_con_ok_fnl
08/10 08:57:22.82 [2] put_command_19 'AT+FTH=3\r'
08/10 08:57:22.82 [2] command write error rc 21, w 9, w2 0
08/10 08:57:22.82 [2] ***** final status: Error_Failed
08/10 08:57:22.82 [2] FmlDone ||n/a|49|
08/10 08:57:22.82 [2] FmlClose 'COM2'
08/10 08:57:22.92 [2] put_command_19 'ATH0\r'
08/10 08:57:22.92 [2] command write error rc 21, w 5, w2 0
08/10 08:57:22.92 [2] wait_for 'OK\r?' or '`0\r' 2sec
08/10 08:57:24.93 [2]  timeout
08/10 08:57:24.93 [2] put_command_19 'AT+FCLASS=0\r'
08/10 08:57:24.93 [2] command write error rc 21, w 12, w2 0
08/10 08:57:24.93 [2] put_command_19 'ATZ\r'
08/10 08:57:24.93 [2] command write error rc 21, w 4, w2 0
08/10 08:57:24.93 [2] wait_for 'OK\r?' or '`0\r' 3sec
08/10 08:57:27.94 [2]  timeout
08/10 08:57:27.94 [2] put_command 'ATH0\r'
08/10 08:57:27.94 [2] command write error rc 21, w 5, w2 0
08/10 08:57:27.94 [2] wait_for 'OK\r?' or '`0\r' 2sec
08/10 08:57:29.95 [2]  timeout
08/10 08:57:29.95 [2] put_command 'ATZ\r'
08/10 08:57:29.95 [2] command write error rc 21, w 4, w2 0
08/10 08:57:29.95 [2] wait_for 'OK\r?' or '`0\r' 3sec
08/10 08:57:32.97 [2]  timeout
08/10 08:57:32.97 '4  send status 'BadSnd' snt 0
08/10 08:57:32.97 '4  retry #410 rty4
08/10 08:57:32.97 '2 pend check avl
08/10 08:57:32.97 '2 pend=1 togo=2 nrte=0
08/10 08:57:33.16 '4  send done
08/10 08:57:34.19 '4  mode check
08/10 08:57:34.19 '4  'Fax idle'
08/10 08:57:36.05 '1 play: wave
08/10 08:57:36.06 '1 open log
08/10 08:57:36.06 '1 open disp
08/10 08:57:54.52 '1 open log
08/10 08:57:54.52 '1 open disp
08/10 08:58:00.28 '1 total shutdown
08/10 08:58:00.28 '4  'Fax hold'
08/10 08:58:00.28 '4  fax_thread end

-- 
_________________________________________________________________________
Regards from the Space Coast.

Mike Snyder
msnyder1{at}cfl.rr.com


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get">http://us.ard.yahoo.com/SIG=12hrbuoht/M=364397.6958316.7892810.4764722/D=groups/S=1705016061:TM/Y=YAHOO/EXP=1123686788/A=2915264/R=0/SIG=11t7isiiv/*http://us.rd.yahoo.com/evt=34443/*http://www.yahoo.com/r/hs">Get
fast access to your favorite Yahoo! Groups. Make Yahoo! your home
page
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---