WC>  GE> Intel 4-clock

WC>  Intel 4 clock? Don't understand that bit.

http://www.4allmemory.com/index.cfm?fuseaction= faq.details&faq_id=25

What is the difference between 2-clock and 4-clock memory?

Two types of SDRAM modules are the 2-clock and the 4-clock module.
Structurally, they are the same, but they are accessed differently.
A 2-clock SDRAM module is set up so that each clock cycle accesses two
chips on the module. A 4-clock SDRAM setup accesses 4 chips per clock
cycle. To choose what kind to get, you must look into the motherboard's
documentation. 4-clock modules are the more commonly used.

The typical indication of the wrong type being used is a system giving
error beeps and not booting as it cannot use the memory installed. The
system will not proceed past POST (Power On Self Test). 2-clock was only
used in 66 MHz systems. All PC 100 and PC 133 memory is 4-clock only.

  * SLMR 2.1a *

--- Maximus 3.01